Keyboard controls
Shortcuts act on the selected node or its connected Device. They are inactive while editing a
text field or control. Press ? to open the reference in the app.
| Keys | Action |
|---|---|
| Left / Right | Tune down or up one step |
| Shift + Left / Right | Tune ten steps |
[ / ] | Choose a smaller or larger tuning step |
f | Focus the device dial; press Enter to type a frequency |
, / . | Select the previous or next channel |
m / M | Cycle the selected channel's analog mode forward or backward |
- / + or = | Lower or raise squelch by 2 dB |
s | Toggle squelch |
1–9 | Select the nth node in the patch |
p | Pin or unpin the selected node on the rack |
v | Switch between Patch and Rack |
Ctrl/⌘ Z | Undo the last workspace change, for every connected client |
Ctrl/⌘ Shift Z or Ctrl/⌘ Y | Redo |
Ctrl/⌘ C | Copy the selected nodes and the wires between them |
Ctrl/⌘ V | Paste them beside the originals |
| Backspace | Delete the selected node or wire |
? | Open the keyboard reference |
| Escape | Close an overlay or menu |
Dial controls
Once the frequency dial has focus:
- Left and Right choose a digit.
- Up and Down change the selected digit.
- Page Up and Page Down change the next larger place.
- Home and End jump to the first or last place.
- Enter opens direct frequency entry.
Select a Device before scrolling its dial. This keeps canvas scrolling from changing the frequency.